| Model | X6332H | X6332HC | X6332HL | |
| Table size | 1325*320/360 | 1325*320/360 | 1600*320/360 | |
| X/Y/Z table travel | 750/420/460 | 1100/420/450 | 1300/420/450 | |
| X table feed rate | 30-750 | |||
| Y table feed rate | 20-500 | |||
| Z table feed rate | 15-375 | |||
| V | Motor power | 5HP | ||
| Spindle speed | Standard:16steps, 50HZ: 65-4500/60HZ:80-5440 | |||
| Spindle taper | ISO40 | |||
| Quill travel | 127 | |||
| Quill feed | 0.04/0.08/0.15 | |||
| Head rotating | R/L 90° | |||
| Distance from spindle | 115-545 | |||
| nose to table surface | ||||
| H | Motor power | 5HP | ||
| Spindle speed | 50HZ: 45/80/165/260/500/980 60HZ: 55/100/200/315/600/1180 | |||
| Spindle taper | ISO40 | |||
| Distance from spindle | -430 | |||
| to table | ||||
| Distance from spindle | 183 | |||
| to arm | ||||
| Arm travel | 480 | |||
| Arm rotating angle | 360° | |||