| Model | Unit | VMC550L | VMC550LBare machine center |
| The main electrical power | kw | 5.5/7.5(SEVO) | 5.5/7.5(SEVO) |
| End of the spindle to work away from the table | mm | 100-560 | 100-560 |
| Spindle center to guide column | mm | 410 | 410 |
| Speed | rpm | 8000 | 8000 |
| Spindle taper Biduan | mm | BT40 | BT40 |
| Table area | mm2 | 320×800 | 320×800 |
| Maximum loading capacity | kg | 300 | 300 |
| Working from the ground surface height | mm | 880 | 880 |
| T-slot / width / spacing | mm | 3-14-100 | 3-14-100 |
| X-axis travel | mm | 550 | 550 |
| Y-axis travel | mm | 340 | 340 |
| Z-axis travel | mm | 460 | 460 |
| X-axis fast-moving | mm | 15000 | 15000 |
| Y-axis fast-moving | mm | 15000 | 15000 |
| Z-axis fast-moving | mm | 12000 | 12000 |
| Cutting Feed | mm /min | 1-5000 | 1-5000 |
| Positioning accuracy | mm | 0.02 | 0.02 |
| Repeat positioning accuracy | mm | 0.01 | 0.01 |
| Tool diameter of the largest | mm | 120 | 120 |
| Maximum length of the cutting tool | mm | 200 | 200 |
| Knife storage capacity (type hats) to | 12 | 12 | |
| The fastest tool change time | s | 8 | 8 |
| The use of air pressure | mpa | 0.6 | - |
| Voltage/ Frequency | HZ | 380/50 | - |
| Machine Tool Weight | kg | 2800 | 2000 |
| Machine size | mm | 2200×1750×2300 | 1900×1400×1900 |