| Specifications | MJ460 | MJ460MC | ||
| capacity | Max. swing over bed | mm | Φ460 | |
| Max. swing over cross slide | mm | Φ330 | ||
| Max. turning /milling dia. | mm | Φ230（12 station） | Φ310/275 | |
| Φ310（8 station） | ||||
| Max.length of workpiece | mm | 650 | ||
| spindle | Range of spindle speed | r/min | 35 - 3500 | 45 - 4500 |
| Dia in Spindle nose/bore | mm | A2 - 6 / Φ56 | ||
| Spindle taper bore | MT | No：6 | ||
| Dia of through-hole chuck | mm | Φ43 | ||
| Max.output torque on spindle | N.m | 163 | 148 | |
| Dia of hydraulic chuck | inch | 8＂、10＂（through-hole /non-through hole） | ||
| Indexing time on spindle(C axis) | degree | / | 0.001 ° | |
| traverse | Max.traverse of X.Z axis | mm | X：215,Z:675 | X：235,Z: 675 |
| Rapid traverse rate of X, Z axis | m/min | X：15 Z：18 | ||
| motor | Power of spindle（FANUC) | KW | AC11/15(β12/7000i) | AC11/15(α12/10000i) |
| Power of X. Z feed motors（FANUC） | KW | 1.26 / 1.88 | 1.6、3.0 | |
| Power of turret motor（FANUC） | KW | / | AC2.2/3.7(α2/10000i) | |
| toolpost | Toolpost type | / | Horizontal hydraulic（machenical division, hydraulic cramp） | Horizontal driving tool |
| Station No.of toolpost | 8月12日 | 12月12日 | ||
| Driving tool | Tool change time | Sec | 0.6 | 0.48 |
| External blade size | mm | 20×20×125 | ||
| Dia.of boring bar | mm | MAX:Φ40 | MAX:Φ32 | |
| Driving tool speed | r/min | / | MAX:6000 | |
| tailstock | Max.traverse of tailstock | mm | 547 | |
| Traverse of tailstock sleeve | mm | 90(NC can programmed) | ||
| Dia.of tailstock sleeve | mm | Φ 85 | ||
| No. of taper bore on sleeve(inner mounting) | MT | 3# live center (inner mounting) | ||
| others | Overall dimensions(LxWxH) | mm | 3150x1880x2200 | 3150x1880x2200 |
| Net weight | kg | 3800 | 4000 | |
| NC control | / | FANUC:Oi Mate — TB | FANUC:Oi — TB | |
| DASEN:3i— L（mitsubish：E60） | siemens：810D | |||