| Configuration/Type | UNIT | C6085 | |
| Maximum Swing Over Bed | mm | 650 | |
| Maximum Swing Over Slide | mm | 400 | |
| Maximum Machining Length | Chuck | mm | 850 |
| Spindle Head Type | GB59001 | A2-8 | |
| Spindle Taper Hole | ø/mm | 102 | |
| Maximum Diameter of Bore | Hydraulic Through Chuck | ø/mm | 48 |
| Spindle Speed Range | r/min | 100-1500 | |
| Spindle Shift Mode | servo | ||
| Spindle Rated Torque | Nm | 72 | |
| Main Motor Power(GSK Servo) | Kw | 11 | |
| Spindle Motor Maximum Speed Range(30 Min) | Kw | 15 | |
| Chuck Type(AUTOGRIP Made in Taiwan) | Hydraulic None Through Chuck | ||
| Chuck Size | Inch | 12” | |
| Rapid Traverse Speed On X/Z -axis | m/min | 15/20 | |
| Servo Motor Torque On X/Z -axis(GSK) | Nm | 7.5/7.5 | |
| X-axis Travel | mm | 310 | |
| Z-axis Travel | mm | 900 | |
| Guideway Type(HIWIN or PMI) | Linear Guideway | ||
| Turret Type(PRAGATI) | Electric 4 Post Turret | ||
| Turret Change Time | °/sec | 90/1.5 180/2.4 270/3.4 | |
| Turning Tools /Boring Bar Size | mm | 32*32 | |
| Hydraulic Tailstock Sleeve Diameter/Travel | mm | ø88/85 | |
| Tailstock Type | Hydraulic | ||
| Internal Taper of Tailstock Sleeve | MT5 | ||
| Weight | KG | 3500 | |
| Dimension | L*W*H(mm) | 2850x1650x1700 | |