| Configuration/Type | UNIT | C4575 | |
| Maximum Swing Over Bed | mm | 450 | |
| Maximum Swing Over Slide | mm | 260 | |
| Maximum Machining Length Chuck | mm | 730 | |
| Spindle Head Type | GB59001 | A2-6 | |
| Spindle Taper Hole | ø/mm | 62 | |
| Maximum Diameter of Bore | Manual Chuck | ø/mm | 58 |
| Hydraulic Through Chuck | ø/mm | 48 | |
| Hydraulic None Through Chuck | ø/mm | 0 | |
| Spindle Speed Range | r/min | 50-2500 | |
| Spindle Shift Mode | Servo | ||
| Spindle Rated Torque | Nm | 48 | |
| Main Motor Power | Kw | 7.5 | |
| Spindle Motor Maximum Speed Range(30 Min) | Kw | 11 | |
| Chuck Type (AUTOGRIP Made in Taiwan) | Hydraulic None Through Chuck | ||
| Chuck Size | Inch | 10” | |
| Rapid Traverse Speed On X/Z -axis | m/min | 16/24 | |
| Servo Motor Torque On X/Z -axis | Nm | 7.5/7.5 | |
| X-axis Travel | mm | 290 | |
| Z-axis Travel | mm | 750 | |
| Guideway Type | X-Axis Hard Guideway; Z-Axis Linear Guideway | ||
| Turret Type | Electric 4 Post Turret | ||
| Turret Change Time | °/sec | 90/1.5,180/2.4,270/3.4 | |
| Turning Tools /Boring Bar Size | mm | 25*25 | |
| Hydraulic Tailstock Sleeve Diameter/Travel | mm | ø75/120 | |
| Tailstock Type | Hydraulic Tailstock | ||
| Internal Taper of Tailstock Sleeve | MT5 | ||
| Weight | KG | 2500 | |
| Dimension | L*W*H(mm) | 2650*1450*1700 | |
| Optional Configuration | |||
| Hydraulic Through Chuck (AUTOGRIP Made in Taiwan) | 10” | ||