| SPECIFICATION OF PIPE THREADING LATHE | ||||
| ITEMS | UNIT | Q1313B | Q1313C | |
| Mounted bed | Integrated bed | |||
| direct chip drop | slide chip drop | |||
| Capacity | Swing over bed | mm | Φ630/800 | |
| Swing over cross slide | mm | Φ340/540 | ||
| Distance between centers | mm | 1500/3000 | ||
| Pipe threading range | mm | Φ30-126 | ||
| Width of bed way | mm | 550 | ||
| Max. load capacity | T | 3 | ||
| Spindle | Spindle bore | mm | Φ130 | |
| Spindle speed steps | - | FWD. 18/REV. 9 | VF. 3 steps | |
| Spindle speed range | rpm | 12-642/19-800 | 30-650 | |
| Chuck size | mm | Φ400 | ||
| Chuck type | - | 3-jaw manual | ||
| Turret | Turret type | - | Manual 4 position | |
| Tool shank size | mm | 32x32 | ||
| Turret travel | mm | 200 | ||
| Carriage | X axis feed grade/range | mm/r | 22/0.02-0.45 | 64/0.05-12.15 |
| Z axis feed grade/range | mm/r | 26/0.07-1.33 | 64/0.1-24.3 | |
| X axis rapid traverse speed | mm/min | 2300 | ||
| Z axis rapid traverse speed | mm/min | 4000 | ||
| X axis travel | mm | 320 | ||
| Z axis travel | mm | 1310/2810 | ||
| Tailstock | Tailstock quill diameter | mm | Φ100 | |
| Tailstock quill taper | - | MT#5 | ||
| Tailstock quill travel | mm | 250 | ||
| Motors | Main spindle motor | kW | 7.5 | 11 |
| Rapid traverse motor | kW | 0.3 | 1.1 | |
| Coolant pump motor | kW | 0.125 | ||
| Thread | Metric thread grade/range | mm | 1952/1/24 | 52/1-240 |
| Inch thread grade/range | T.P.I. | 1940/2/28 | 2026/1/14 | |
| Module thread grade/range | mm | - | 53/0.5-120 | |
| DP thread grade/range | D.P. | - | 2024/1/28 | |
| Dimensions | Width x Height | mm | 1360×1480 | 1690×1640 |
| Length | mm | 3657/5157 | 3890/5390 | |
| Weight | Net weight | T | 3.8/4.6 | 4.0/5.2 |