| SPECIFICATION OF ENGINE LATHE MACHINE | |||
| ITEMS | UNIT | CW61140 | |
| Capacity | Swing over bed | mm | Φ1400 |
| Swing over cross slide | mm | Φ1000 | |
| Distance between centers | mm | 1500/3000 | |
| Width of bed way | mm | 755 | |
| Max. load capacity | T | 5 | |
| Spindle | Spindle bore | mm | Φ130 |
| Spindle nose taper | - | Metric 140 MT#5 | |
| Spindle nose type | - | C15 | |
| Spindle speed steps | - | 21 steps | |
| Spindle speed range | rpm | 3.15-315 | |
| Chuck size | mm | Φ1000 | |
| Chuck type | - | 4-jaw manual | |
| Turret | Turret type | - | Manual 4 position |
| Tool shank size | mm | 45x45 | |
| Turret travel | mm | 300 | |
| Carriage | X axis feed grade/range | mm/r | 56/0.05-6 |
| Z axis feed grade/range | mm/r | 56/0.1-12 | |
| X axis rapid traverse speed | mm/min | 1870 | |
| Z axis rapid traverse speed | mm/min | 3740 | |
| X axis travel | mm | 520 | |
| Z axis travel | mm | 1300/2800 | |
| Tailstock | Tailstock quill diameter | mm | Φ140 |
| Tailstock quill taper | - | MT#6 | |
| Tailstock quill travel | mm | 300 | |
| Motors | Main spindle motor | kW | 22 |
| Rapid traverse motor | kW | 1.5 | |
| Coolant pump motor | kW | 0.125 | |
| Thread | Metric thread grade/range | mm | 44/1-120 |
| Inch thread grade/range | T.P.I. | 31/ 3/8-28 | |
| Module thread grade/range | mm | 45/0.5-60 | |
| DP thread grade/range | D.P. | 30/1-56 | |
| Dimensions | Width x Height | mm | 2250x2050 |
| Length | mm | 4600/6100 | |
| Weight | Net weight | T | 11.2/12.3 |