| SPECIFICATION OF ENGINE LATHE MACHINE | |||
| ITEMS | UNIT | CWY61100 | |
| Capacity | Swing over bed | mm | Φ1000 |
| Swing over gap | mm | Φ1200 (customize gap bed CWY62100) | |
| Swing over cross slide | mm | Φ680 | |
| Distance between centers | mm | 1500/2000/3000 | |
| Width of bed way | mm | 600 | |
| Max. load capacity | T | 3 | |
| Spindle | Spindle bore | mm | Φ104 |
| Spindle nose taper | - | Metric 120 MT#5 | |
| Spindle nose type | - | C11 | |
| Spindle speed steps | - | 18 steps | |
| Spindle speed range | rpm | 5.4-720 | |
| Chuck size | mm | Φ315 | |
| Chuck type | - | 3-jaw manual | |
| Turret | Turret type | - | Manual 4 position |
| Tool shank size | mm | 30x30 | |
| Turret travel | mm | 200 | |
| Carriage | X axis feed grade/range | mm/r | 64/0.05-0.912 |
| Z axis feed grade/range | mm/r | 64/0.1-24.3 | |
| X axis rapid traverse speed | mm/min | 2300 | |
| Z axis rapid traverse speed | mm/min | 4000 | |
| X axis travel | mm | 420 | |
| Z axis travel | mm | 1310/1810/2810 | |
| Tailstock | Tailstock quill diameter | mm | Φ100 |
| Tailstock quill taper | - | MT#5 | |
| Tailstock quill travel | mm | 250 | |
| Motors | Main spindle motor | kW | 11/15 |
| Rapid traverse motor | kW | 1.1 | |
| Coolant pump motor | kW | 0.125 | |
| Thread | Metric thread grade/range | mm | 50/1-240 |
| Inch thread grade/range | T.P.I. | 2026/1/14 | |
| Module thread grade/range | mm | 53/0.5-120 | |
| DP thread grade/range | D.P. | 2024/1/28 | |
| Dimensions | Width x Height | mm | 1550×1630 |
| Length | mm | 3710/4210/5225 | |
| Weight | Net weight | T | 5.5/5.9/6.2 |