| SPECIFICATION OF ENGINE LATHE MACHINE | ||||
| ITEMS | UNIT | CW6163B | CW6163C | |
| Mounted bed | Integrated bed | |||
| Capacity | Swing over bed | mm | Φ630 | |
| Swing over gap | mm | Φ800 (customize gap bed CW6263) | ||
| Swing over cross slide | mm | Φ350 | ||
| Distance between centers | mm | 1500/2000/3000 | ||
| Width of bed way | mm | 550 | ||
| Max. load capacity | T | 3 | ||
| Spindle | Spindle bore | mm | Φ104 | |
| Spindle nose taper | - | Metric 120 MT#5 | ||
| Spindle nose type | - | C11 | ||
| Spindle speed steps | - | 18 steps | ||
| Spindle speed range | rpm | 7.5-1000 | ||
| Chuck size | mm | Φ315 | ||
| Chuck type | - | 3-jaw manual | ||
| Turret | Turret type | - | Manual 4 position | |
| Tool shank size | mm | 32x32 | ||
| Turret travel | mm | 200 | ||
| Carriage | X axis feed grade/range | mm/r | 64/0.05-0.912 | |
| Z axis feed grade/range | mm/r | 64/0.1-24.3 | ||
| X axis rapid traverse speed | mm/min | 2300 | ||
| Z axis rapid traverse speed | mm/min | 4000 | ||
| X axis travel | mm | 315 | ||
| Z axis travel | mm | 1310/1810/2810 | ||
| Tailstock | Tailstock quill diameter | mm | Φ100 | |
| Tailstock quill taper | - | MT#5 | ||
| Tailstock quill travel | mm | 250 | ||
| Motors | Main spindle motor | kW | 11 | |
| Rapid traverse motor | kW | 1.1 | ||
| Coolant pump motor | kW | 0.125 | ||
| Thread | Metric thread grade/range | mm | 50/1-240 | |
| Inch thread grade/range | T.P.I. | 2026/1/14 | ||
| Module thread grade/range | mm | 53/0.5-120 | ||
| DP thread grade/range | D.P. | 2024/1/28 | ||
| Dimensions | Width x Height | mm | 1450×1540 | |
| Length | mm | 3690/4190/5190 | ||
| Weight | Net weight | T | 3.7/4.1/4.4 | 3.8/4.2/4.4 |